1.Introduction
1.1.Description
1.2.Box Contents
1.3.Endpoint Model Comparison
1.4.Features
1.5.Application Modes
1.6.Typical Applications
1.6.1.System Design Studio
1.6.2.Corporate Application
1.6.3.Video Wall Application
1.6.4.Live Event with Dual Scaler Application
1.6.5.Flight Simulation Application
1.6.6.Multiviewer Application
1.7.Availability of the Endpoint Models
2.Product Overview
2.1.Front and Rear View - F-series Endpoint Devices
2.1.1.Front View
2.1.2.Rear View - F100 / F111 / F121 Models
2.1.3.Rear View - F130 Model
2.1.4.Rear View - F110 / F120 Models
2.2.Front and Rear View - R-series Endpoint Devices
2.2.1.Front View
2.2.2.Rear View
2.3.Front and Rear View - UBEX-MMU-X200
2.3.1.Front View
2.3.2.Rear View
3.Front Panel LCD Menu Operation - MMU
3.1.Introduction
3.1.1.Menu Navigation
3.1.2.Parameter Selection
3.2.System Settings Menu
3.2.1.Network
3.2.2.Time and Date
3.2.3.Display Brightness
3.2.4.Restart MMU Hardware
3.2.5.Restore Factory Defaults
3.3.System Status Menu
4.Front Panel LCD Menu Operation - Endpoints
4.1.The Tree Structure of the LCD Menu
4.2.Introduction
4.2.1.Menu Navigation
4.2.2.Operation ModeVisualization
4.2.3.Parameter Selection
4.3.Home Screen
4.4.Ports Menu - Transmitter Operation Mode
4.4.1.TX I1 and TX I2 Ports
4.4.2.TX O1 and TX O2 Ports
4.5.Ports Menu - Receiver Operation Mode
4.5.1.RX HDMI Output 1 and 2 Ports
4.5.2.RX I1 and RX I2 Ports
4.6.Ports Menu - Transceiver Operation Mode
4.6.1.TRX I2 Port
4.6.2.TRX O1 Port
4.6.3.TRX O2 Port
4.7.Ports Menu - Multiviewer Operation Mode
4.7.1.RXMV I1 and I2 Input Ports
4.7.2.RXMV O1 Output Port
4.7.3.RXMV O2 Output Port
4.8.EDID Menu
4.8.1.View
4.9.KM Menu
4.9.1.U1
4.9.2.D1 and D2
4.10.System Status Menu
4.11.System Settings Menu
4.11.1.Network
4.11.2.Application Mode
4.11.3.Front Panel
4.11.4.Restart Device
4.11.5.Bootload Mode
5.Installation
5.1.Mounting Accessory Compatibility Table
5.2.Mounting Options - F-series Endpoint Devices
5.2.1.Mounting Bracket V2
5.2.2.UD Mounting Plate F120
5.2.3.Rack Shelf Mounting
5.3.Mounting Options - R-series Endpoint Devices
5.3.1.Truss Mounting
5.3.2.Standard Rack Installation with Two Units
5.3.3.Standard Rack Installation with One Unit
5.4.Rack Shelf Mounting - MMU
5.5.Electrical Connections
5.5.1.SFP / SFP+ Slots
5.5.2.AC Power Connection
5.5.3.Symmetrical Analog Stereo Audio Connector
5.5.4.USB-A Connectors
5.5.5.USB-B Connector
5.5.6.RS-232 Connector
5.5.7.USB Mini-B Connector
5.5.8.USB-C Connector
5.5.9.IR Connector
5.5.10.HDMI Connector
5.5.11.Ethernet Connectors
5.5.12.Neutrik opticalCON Connectors
5.6.Connections
5.6.1.F-series Endpoints - Transmitter Operation Mode
5.6.2.F-series Endpoints - Receiver Operation Mode
5.6.3.F-series Endpoints - Transceiver Operation Mode
5.6.4.F-series Endpoints - Multiviewer Operation Mode
5.6.5.F110 /F120 Model - USB K+M and Infrared Connections
5.6.6.R-series Endpoints - Transmitter Operation Mode
5.6.7.R-series Endpoints - Receiver Operation Mode
5.6.8.R-series Endpoints - Transceiver Operation Mode
5.6.9.R-series Endpoints - Multiviewer Operation Mode
5.6.10.Matrix Management Unit (MMU)
5.7.SFP / SFP+ Slot Connection
5.7.1.Installation of SFP / SFP+ Modules
5.7.2.Installation of DAC Cables
5.8.Fiber Optical Cable Connections
5.8.1.Connection between SFP+ Modules
5.8.2.Connection between BiDi (Bidirectional) SFP+ Modules
5.8.3.Connection between Neutrik opticalCON DUO Connectors
5.8.4.Connection between Neutrik opticalCON DUO BiDi Connectors
5.9.Copper Cable Connections
5.10.Connection between the Switch and R-series Endpoints
5.10.1.SFP+ to Neutrik opticalCON DUO
5.10.2.SFP+ to Neutrik opticalCON QUAD
5.10.3.SFP+ BiDi to Neutrik opticalCON DUO BiDi
5.11.Ethernet Switch - Detailed Requirements
5.12.Ethernet Switch Configuration
5.12.1.Link Aggregation (LAG)
5.12.2.VLAN
5.12.3.IGMPv2
5.12.4.LLDP
5.12.5.Installation and Network Setup Guide for UBEX
5.12.6.System Design Guide for UBEX
5.13.Startup of the System
5.13.1.Switch on the Devices
5.13.2.Configure the Operation Mode
5.13.3.Connect to the Matrix Management Unit
5.13.4.Check the Signal Status
5.13.5.Customize the View of the Matrix
5.13.6.Give Unique Names for the Sources and Destinations
5.13.7.Add Tags to the Video Streams
5.13.8.Customize the Order of the Endpoints
5.13.9.Set the Video Crosspoint State
5.13.10.Set the Source MUX Settings
5.13.11.Check the Signal Bandwidth Status
5.13.12.Set the HDCP Settings
5.13.13.Emulate the Correct EDID
5.13.14.Set the Scalers
5.13.15.Set the Audio Crosspoint State
5.13.16.Set the Parameters of the Audio Streams
5.13.17.Checkpoints for the Seamless Switching
6.UBEX Concept
6.1.The Matrix Management Unit (MMU)
6.1.1.Port Diagram
6.1.2.Endpoint License
6.2.Control Features
6.2.1.Ethernet Interface
6.2.2.Serial Interface
6.3.Video Interface
6.3.1.Transmitter Mode
6.3.2.Receiver Mode
6.3.3.Transceiver Mode
6.3.4.Bandwidth Limitation
6.3.5.The Difference between the Image Positions of the Scaler
6.3.6.Timing Modes
6.3.7.HDMI Signal Transmission - Example
6.4.Video Wall
6.4.1.Description
6.4.2.Layouts and Zones
6.4.3.Identifying of the Display/Zone
6.4.4.Software Control Modes of the Video Wall
6.5.Multiviewer Mode
6.5.1.Activation of the Multiviewer Mode
6.5.2.Definitions
6.5.3.Description
6.5.4.Port Diagram
6.5.5.Options and Features
6.5.6.Multistream Feature of the Transmitter
6.6.Multiview Designer - Tutorial
6.6.1.Installation
6.6.2.Configuration
6.7.Audio Interface
6.7.1.Transmitter Mode - F100 / R100 Models
6.7.2.Receiver Mode - F100 / R100 Models
6.7.3.Transceiver Mode - F100 / R100 Models
6.7.4.Transmitter Mode - F110/F111/F120/F121/F130 Models
6.7.5.Receiver Mode - F110/F111/F120/F121/F130 Models
6.7.6.Transceiver Mode - F110/F111/F120/F121/F130 Models
6.7.7.Audio Signal Transmission - Example
6.8.Serial Interface
6.8.1.Technical Background
6.8.2.RS-232 Signal Transmission – Example
6.9.Infrared Interface
6.9.1.Technical Background
6.9.2.Infrared Signal Transmission – Example
6.10.USB K+M Interface (F120 / F121 Models)
6.10.1.Technical Background
6.10.2.USB K+M Extension - Example
6.11.USB KVM / USB 2.0 Interface (F130 Model)
6.11.1.Technical Background
6.11.2.Pairing the Icron Devices
6.11.3.USB KVM Extension - Example
6.12.SFP / SFP+ Interfaces
6.12.1.SFP+ Interface for the Endpoints
6.12.2.SFP Interface for the MMU
6.13.Redundant 10G Link Channels
6.14.Further Built-in Features
6.14.1.UBEX Matrix Database Backup and Restore
6.14.2.Advanced EDID Management
6.14.3.Centralized Firmware Update
6.15.Software Control Modes
7.Software Control - Built-in Web
7.1.Establishing the Connection
7.2.The Layout of the Built-in Web
8.Software Control - Lightware Device Controller
8.1.Install and Update
8.2.Running the LDC
8.3.Establishing Connection
8.4.Crosspoint Menu - Video Layer
8.4.1.Grid View
8.4.2.Tile View
8.5.Crosspoint Menu - Audio Layer
8.5.1.Grid View
8.5.2.Tile View
8.6.Crosspoint Menu - USB Layer
8.6.1.Grid View
8.6.2.Tile View
8.7.Search Field
8.7.1.The Concept
8.7.2.Application Areas of the Search Field
8.8.Default Naming / Numbering Explanation
8.8.1.Source and Destination Numbering
8.8.2.Default Naming of the Devices and the Streams
8.9.Video Source Port Properties Window
8.9.1.Stream Information
8.9.2.Port Information
8.9.3.Device Information
8.10.Video Destination Port Properties Window
8.10.1.Stream Information
8.10.2.Port Information
8.10.3.Device Information
8.11.Audio Port Properties Windows
8.11.1.HDMI Source / HDMI Destination Port Properties Window
8.11.2.Analog Audio Source Port Properties Window
8.11.3.Analog Audio Destination Port Properties Window
8.12.Device Properties Windows
8.12.1.Transmitter Operation Mode
8.12.2.Receiver Operation Mode
8.12.3.Transceiver Operation Mode
8.13.Diagnostic Tools
8.13.1.Frame Detector
8.13.2.No Sync Screen (Test Pattern)
8.13.3.Identify Stream / Identify Display
8.14.EDID Management Menu
8.14.1.EDID Operations
8.14.2.Editing an EDID
8.14.3.Creating an EDID - Easy EDID Creator
8.14.4.EDID Summary Window
8.15.Control Menu
8.15.1.Ethernet Tab
8.15.2.RS-232 Tab
8.15.3.Infra Tab
8.16.Device Map
8.16.1.The Steps of the Reorder
8.16.2.Tools in the Device Map
8.17.MMUSettings
8.17.1.Status Tab
8.17.2.Network Tab
8.17.3.System Log Tab
8.17.4.License Tab
8.17.5.System Tab
8.18.Diagnostics Menu
8.18.1.Link Status Tab
8.18.2.Health Status Tab
8.18.3.Update Firmware
8.18.4.Sink Status Tab
8.19.Terminal Window
8.20.Video Wall Setup
8.20.1.Tutorial - Creating a New Video Wall
8.20.2.Advanced Settings and Display Parameters
8.20.3.Tutorial - Defining New Layouts and Zones
8.20.4.Managing of the Layout and Zones
8.20.5.Crosspoint Menu with Video Wall
8.20.6.Zone Properties Window
8.21.Multiviewer Configuration
8.21.1.Crosspoint Menu
8.21.2.Port Properties Panel
8.21.3.Layout Settings
9.Programmers Reference
9.1.Overview
9.2.Instructions for the Terminal Application Usage
9.3.Protocol Rules
9.3.1.LW3 Tree Structure and Command Structure (Examples)
9.3.2.General Rules
9.3.3.Command Types
9.3.4.Prefix Summary
9.3.5.Error Messages
9.3.6.Escaping
9.3.7.Signature
9.3.8.Subscription
9.3.9.Notifications about the Changes of the Properties
9.3.10.Legend for the Control Commands
9.4.The Tree Structure of the UBEX Matrix
9.4.1.The Tree Structure of the MMU
9.4.2.Endpoint ID Calculation
9.4.3.Stream ID Calculation
9.5.System Commands - MMU
9.5.1.Set the Device Label
9.5.2.Query the Product Name
9.5.3.Query the Firmware Package Version
9.5.4.Query the Date and Time of the System
9.5.5.Setting of the Date and Time Manually
9.5.6.Setting the NTP Server
9.5.7.Enable/Disable NTP
9.5.8.Setting the Brightness of the LCD Screen
9.5.9.Software Resetting the Device
9.5.10.Rebooting the Device
9.5.11.Restore the Factory Default Settings
9.6.System Commands - Endpoints
9.6.1.Set the Device Label
9.6.2.Query the Product Name
9.6.3.Query the Operation Mode
9.6.4.Set the Operation Mode
9.6.5.Query the MAC Address of the Device
9.6.6.Query the Firmware Package Version
9.6.7.Identify the Device
9.6.8.Control Lock
9.6.9.Dark Mode Setting
9.6.10.Dark Mode Delay Setting
9.6.11.Setting the Rotary Direction of the Jog Dial Knob
9.6.12.Setting the Brightness of the LCD Screen
9.6.13.Bootload Mode Setting
9.6.14.Restarting the Device
9.6.15.Restore the Factory Default Settings
9.7.Endpoint Management Commands
9.7.1.Query the Number of Registered Endpoints
9.7.2.Query the Number of Connected Endpoints
9.7.3.Query the Number of Registered Transmitters
9.7.4.Query the Number of Connected Transmitters
9.7.5.Query the Number of Registered Receivers
9.7.6.Query the Number of Connected Receivers
9.7.7.Query the Number of Registered Transceivers
9.7.8.Query the Number of Connected Transceivers
9.7.9.Query the Connection Status of an Endpoint
9.7.10.Query the Claiming Status of an Endpoint
9.7.11.Unclaiming an Endpoint
9.7.12.Unclaiming All Endpoints
9.7.13.Query the Number of the Mapped Endpoints
9.7.14.Query the Endpoint ID of a Logical Device ID
9.7.15.Assigning an Endpoint to a Logical Device ID
9.8.Video Crosspoint Settings
9.8.1.Switching the Video Stream to One Destination
9.8.2.Switching a Video Stream to All Destinations
9.8.3.Disconnecting the Stream
9.8.4.Query the Status of All Video Ports
9.8.5.Query the Number of the Source Ports
9.8.6.Query the Number of the Destination Ports
9.9.Video Stream Settings - Source (Input) Side
9.9.1.Query the Name of the Stream
9.9.2.Setting the Name of the Stream
9.9.3.Query the Tags of the Stream
9.9.4.Adding Tags to the Stream
9.9.5.Deleting Tags of the Stream
9.9.6.Deleting All Tags of the Stream
9.9.7.Query All Tags of the Device
9.9.8.Enable/Disable the Stream
9.9.9.Identify the Stream
9.9.10.Resolution Setting
9.9.11.Resolution Mode Setting
9.9.12.Scaler - Image Position Setting
9.9.13.Tile Resolution Setting
9.9.14.Color Space Converter Setting
9.9.15.Color Range Setting
9.9.16.Color Depth Setting
9.9.17.Query the Timing Mode
9.9.18.HDCP Setting
9.10.Video Stream Settings - Destination (Output) Side
9.10.1.Query the Name of the Destination
9.10.2.Setting the Name of the Destination
9.10.3.Query the Tags of the Destination
9.10.4.Adding Tags to the Destination
9.10.5.Deleting Tags of the Destination
9.10.6.Deleting All Tags of the Destination
9.10.7.Query All the Tags of the Device
9.10.8.Enable/Disable the Stream
9.10.9.Resolution Setting
9.10.10.Resolution Mode Setting
9.10.11.Query the EDID Based Resolution
9.10.12.Scaler - Image Position Setting
9.10.13.Color Space Converter Setting
9.10.14.Color Range Setting
9.10.15.Color Depth Setting
9.10.16.Query the Timing Mode
9.10.17.Timing Mode Setting
9.10.18.No Sync Screen (Test Pattern) Mode
9.10.19.No Sync Screen (Test Pattern) Color Setting
9.10.20.Enable Signal Freeze
9.10.21.Disable Signal Freeze
9.10.22.Identify the Display
9.10.23.HDCP Setting
9.10.24.Query the Source MUX Options
9.10.25.Source MUX Setting
9.11.Video Wall Configuration
9.11.1.The Tree Structure of the Video Wall
9.11.2.Creating Video Wall
9.11.3.Delete a Video Wall
9.11.4.Setting the Name of the Video Wall
9.11.5.Querying the Size of the Video Wall
9.11.6.Modifying the Size of the Video Wall
9.11.7.Assign Outputs to the Video Wall
9.11.8.Unassign Outputs
9.11.9.Unassign All Outputs
9.11.10.Querying an Output Assignment
9.11.11.Setting the Background Color of the Video Wall
9.11.12.Timing Mode Setting
9.11.13.Color Space Converter Setting
9.11.14.Resolution Mode Setting
9.11.15.Resolution Setting
9.11.16.No Sync Screen Setting
9.11.17.Query the Display Parameters
9.11.18.Change the Width of the Display
9.11.19.Change the Height of the Display
9.11.20.Change the Top Bezel Size of the Display
9.11.21.Change the Bottom Bezel Size of the Display
9.11.22.Change the Left Bezel Size of the Display
9.11.23.Change the Right Bezel Size of the Display
9.11.24.Change the Horizontal Gap Size
9.11.25.Change the Vertical Gap Size
9.11.26.Querying the State of the Video Wall
9.11.27.Setting the State of the Video Wall
9.11.28.Identify the Video Wall
9.11.29.Creating a New Layout
9.11.30.Deleting a Layout
9.11.31.Deleting All Layouts
9.11.32.Querying the Active Layout
9.11.33.Activate Layout
9.11.34.Setting the Name of the Layout
9.11.35.Identify the Layout
9.11.36.Creating Zone
9.11.37.Deleting a Zone
9.11.38.Deleting All Zones
9.11.39.Setting the Name of the Zone
9.11.40.Querying the Size of the Zone
9.11.41.Identify the Zone
9.11.42.Setting the Background Color of the Zone
9.11.43.Assign Display to the Zone
9.11.44.Unassign Display from the Zone
9.11.45.Unassign All Displays from the Zone
9.11.46.Query the Tags of the Zone
9.11.47.Adding Tags to the Zone
9.11.48.Deleting Tags of the Zone
9.11.49.Deleting All Tags of the Zone
9.11.50.Query the Static Tags of the Zone
9.11.51.Switching the Video Stream to the Video Wall Zone
9.12.Multiviewer Configuration
9.12.1.Setting the Resolution of the Canvas
9.12.2.Enabling/Disabling the Tile
9.12.3.Tile Position Setting
9.12.4.Tile Size Setting
9.12.5.Layer Order Setting
9.12.6.Tile Opacity Setting
9.12.7.Color Depth Setting
9.12.8.Querying the Status of the Tile
9.12.9.No Sync Screen (Test Pattern) Mode
9.12.10.No Sync Screen (Test Pattern) Color Setting
9.12.11.HDCP Setting
9.12.12.Identify Stream / Identify Display
9.12.13.Querying the Source MUX Options
9.12.14.Source MUX Setting
9.13.Audio Crosspoint Settings
9.13.1.Query the Status of All Audio Ports
9.13.2.Switching the Audio Stream to One Destination
9.13.3.Switching an Audio Stream to All Destinations
9.13.4.Query the Number of the Source Ports
9.13.5.Query the Number of the Destination Ports
9.14.Audio Stream Settings
9.14.1.Enable/Disable the Audio Stream Source
9.14.2.Enable/Disable the Audio Stream Destination
9.14.3.Query the Name of the Stream
9.14.4.Setting the Name of the Stream
9.14.5.Query the Name of the Destination
9.14.6.Setting the Name of the Destination
9.14.7.Query the Tags of the Stream/Destination
9.14.8.Adding Tags to the Stream/Destination
9.14.9.Deleting Tags of the Stream
9.14.10.Deleting All Tags of the Stream
9.14.11.Query All Tags of the Device
9.15.Analog Audio Port Settings
9.15.1.Setting the Volume in dB
9.15.2.Setting the Volume in Percent
9.15.3.Setting the Balance
9.15.4.Setting theGain
9.15.5.Mute/Unmute the Analog Audio Output Port
9.16.EDID Management
9.16.1.Query the Validity of a Dynamic EDID
9.16.2.Query the Preferred Resolution of an EDID
9.16.3.Emulating an EDID on an Input Port
9.16.4.Emulating an EDID on All Input Ports
9.16.5.Copy an EDID to User Memory
9.16.6.Deleting an EDID from User Memory
9.16.7.Resetting the Emulated EDIDs
9.17.System Monitoring Commands
9.17.1.Query Connected Device Presence
9.17.2.Query Video Signal Presence on a Port
9.17.3.Query Video Signal Presence in a Stream
9.17.4.Query Embedded Audio Presence
9.17.5.Query the Signal Type
9.17.6.Query the Original Resolution of the Stream Source
9.17.7.Query the Modified Resolution of the Stream Source
9.17.8.Query the Original Resolution of the Stream Destination
9.17.9.Query the Modified Resolution of the Stream Destination
9.17.10.Query the Bandwidth of the Stream
9.17.11.Query the Control Module of the Stream Destination
9.17.12.Query the Bandwidth Limitation Indicator
9.17.13.Query the Status of the Analog Audio Output
9.17.14.Query the Health Status of a Selected Endpoint
9.17.15.Query the Link Status of a Selected Endpoint
9.18.SFP+ Module Information
9.18.1.Query the Vendor
9.18.2.Query the Part Number
9.18.3.Query the Compliance
9.18.4.Query the Maximum Allowed Cable Length
9.18.5.Query the Type of the Module
9.18.6.Query the Compatibility of the Module
9.19.Network Configuration - MMU
9.19.1.Query the DHCP State
9.19.2.Change the DHCP State
9.19.3.Query the IP Address
9.19.4.Change the IP Address (Static)
9.19.5.Query the Subnet Mask
9.19.6.Change the Subnet Mask (Static)
9.19.7.Query the Gateway Address
9.19.8.Change the Gateway Address (Static)
9.19.9.Apply Network Settings
9.20.Ethernet Port Configuration - Endpoint
9.20.1.Enabling the Port
9.20.2.Ethernet Mode Setting
9.20.3.Setting the Name of the Port
9.20.4.Query the Tags of the Port
9.20.5.Adding Tags to the Port
9.20.6.Deleting Tags of the Port
9.20.7.Deleting All Tags of the Port
9.20.8.Query All Tags of the Device
9.21.Serial Port Configuration - MMU
9.21.1.BAUD Rate Setting
9.21.2.Databits Setting
9.21.3.Stopbits Setting
9.21.4.Parity Setting
9.21.5.Enabling the Port
9.22.Serial Port Configuration - Endpoint Devices
9.22.1.BAUD Rate Setting
9.22.2.Stopbits Setting
9.22.3.Parity Setting
9.22.4.Command Injection TCP Port Setting
9.22.5.Remap the Command Injection TCP ports
9.22.6.Query the Current Configuration
9.22.7.Enabling the Port
9.22.8.Setting the Name of the Port
9.22.9.Query the Tags of the Port
9.22.10.Adding Tags to the Port
9.22.11.Deleting Tags of the Port
9.22.12.Deleting All Tags of the Port
9.22.13.Query All Tags of the Device
9.23.Infrared Port Configuration - Endpoint Devices
9.23.1.Enable/Disable the Port
9.23.2.Setting the Name of the Input Port
9.23.3.Setting the Name of the Output Port
9.23.4.Change Command Injection Port Number
9.23.5.Enable/Disable Output Signal Modulation
9.23.6.Query the Tags of the Port
9.23.7.Adding Tags to the Port
9.23.8.Deleting Tags of the Port
9.23.9.Deleting All Tags of the Port
9.23.10.Query All Tags of the Device
9.24.Message Sending via Communication Ports
9.24.1.Sending a Text (ASCII-format) via Serial Port
9.24.2.Sending a Binary Message (HEX-format) via Serial Port
9.24.3.Sending a Message (ASCII-format) via Serial Port
9.24.4.Sending Hex Codes in Little-endian Format via IR Port
9.24.5.Sending Hex Codes in Big-endian Format via IR Port
9.25.USB K+M Settings (F120 / F121 Models)
9.25.1.Querying the Number of Emulated USB Ports
9.25.2.Querying the Number of Destination USB Ports
9.25.3.Switching the Emulated Port to One Destination
9.25.4.Switching an Emulated Port to All Destinations
9.25.5.Switching the Local Emulated Port to the Local Destination
9.25.6.Querying the Name of the Emulated USB Port
9.25.7.Setting the Name of the Emulated USB Port
9.25.8.Querying the Name of the Destination USB Port
9.25.9.Setting the Name of the Destination USB Port
9.25.10.Querying the Tags of the USB Ports
9.25.11.Adding Tags to the USB Ports
9.25.12.Deleting Tags of the USB Ports
9.25.13.Deleting All Tags of the USB Ports
9.25.14.Querying All Tags of the Device
9.26.USB KVM / USB 2.0 Settings (F130 Model)
9.26.1.Setting the Operation Mode of the Icron USB 2.0 Module
9.26.2.Setting the Icron Traffic Direction
9.26.3.Querying the MAC Address of the Icron Module
9.26.4.Querying the Number of Emulated USB HID Ports
9.26.5.Querying the Number of Destination USB Ports
9.26.6.Switching the Emulated Port to One Destination
9.26.7.Switching an Emulated Port to All Destinations
9.26.8.Switching the Local Emulated Port to the Local Destination
9.26.9.Querying the Name of the Emulated USB HID Port
9.26.10.Setting the Name of the Emulated USB HID Port
9.26.11.Querying the Name of the Destination USB HID Port
9.26.12.Setting the Name of the Destination USB HID Port
9.26.13.Querying the Tags of the USB HID Ports
9.26.14.Adding Tags to the USB HID Ports
9.26.15.Deleting Tags of the USB HID Ports
9.26.16.Deleting All Tags of the USB HID Ports
9.26.17.Querying All Tags of the Device
9.27.License Handling
9.27.1.Querying the Name of the License
9.27.2.Querying the Description of the License
9.27.3.Querying the Endpoint Limitation
9.27.4.Querying the Status of the License
9.27.5.Removing the License
9.28.Centralized Firmware Update
9.28.1.Query the Status of Firmware Update
9.28.2.Query the Installed Firmware Package Version
9.28.3.Launching the Firmware Update Procedure
9.28.4.Cancellation of the Firmware Update Procedure
9.28.5.Restarting the Firmware Update Procedure
9.28.6.Query the Firmware Update Progress
9.28.7.Query the Last Message of the Firmware Update
9.28.8.Allowing Unsupported Firmware Packages
9.29.LW3 Protocol Commands - Quick Summary
10.Switchable USB Command Protocol
10.1.Instructions for the Terminal Application Usage
10.2.Setup
10.3.Protocol Description
10.3.1.Legend for the Commands
10.4.Network Broadcast
10.4.1.Subnet Broadcast
10.4.2.All Local Subnet Broadcast
10.4.3.Mismatched Network Configuration
10.5.Generic Replies
10.5.1.Acknowledge
10.5.2.Negative Acknowledge
10.6.Supported Messages
10.6.1.Requesting and Replying Device Information
10.6.2.Ping
10.6.3.Requesting and Replying Extended Device Information
10.6.4.Pairing to a Device
10.6.5.Removing Device Pairing
10.6.6.Requesting and Replying Device Topology
10.6.7.Using DHCP
10.6.8.Using Static IP
10.6.9.Using Filtering Strategy
10.6.10.Reseting Device
10.6.11.Requesting and Replying Configuration Response Data
10.6.12.Requesting and Replying Link Status
10.6.13.Removing All Pairings
10.6.14.Force Pairing to Device
10.6.15.Reseting Force Pairing to Device
10.6.16.Writing the Extended Configuration Variable
10.6.17.Requesting the Extended Configuration Variable
11.Firmware Update
11.1.Preparation
11.1.1.About the Firmware Package (LFP2 File)
11.1.2.LDU2 Installation
11.2.Running the Software
11.2.1.LDU2 Interfaces
11.3.The Updating Steps
11.4.Updating via GUI - MMU
11.4.1.Establish Connection
11.4.2.Start the LDU2 Application and Follow the Steps
11.5.Endpoint Update - Centralized Firmware Update
11.5.1.Description
11.5.2.Technical Background
11.5.3.Centralized Firmware Update - Detailed Instructions
11.6.Endpoint Update - Manual Method
11.6.1.The Steps of the Preparing - Detailed Instructions
11.6.2.Start the LDU2 Application and Follow the Steps
11.7.Command Line Interface (CLI)
11.7.1.How to Run
11.7.2.How to Use
11.8.CLI Commands
11.8.1.Help
11.8.2.LDU2 Version
11.8.3.Check For New LDU2 Version
11.8.4.Device Info
11.8.5.Update
11.8.6.Restore
11.8.7.Package Options
11.8.8.Complex Examples
11.8.9.Exit Codes
11.9.If the Update is not successful
12.Troubleshooting
12.1.Use Cases
12.2.Network Diagnostics for UBEX Matrix
12.2.1.Lightware Device Controller (LDC) Software
12.2.2.Front Panel LEDs and LCD Menu
12.3.How to Speed Up the Troubleshooting Process
13.Technologies
13.1.EDID Management
13.1.1.Understanding the EDID
13.1.2.Advanced EDID Management
13.2.HDCP Management
13.2.1.Protected and Unprotected Content
13.2.2.Disable Unnecessary Encryption
13.2.3.HDCP v2.2
13.3.Pixel Accurate Reclocking
13.4.AV Over IP
13.4.1.Basics
13.4.2.What is TCP/IP?
13.4.3.Link Aggregation Protocol
13.4.4.Multicast DNS (mDNS) Protocol
14.Assembly Guides
14.1.Front Plate Exchange for F-series Endpoint Devices
14.1.1.Tool Requirements
14.1.2.The Steps of the Front Plate Exchange
14.2.SFP+ Module Changing in R-series Endpoints
14.3.Air Filter Foam Changing in R-series Endpoints
14.4.Hidden USB Connector for Debug Purpose
15.Appendix
15.1.Specification
15.1.1.UBEX F-series Endpoints
15.1.2.UBEX R-series Endpoints
15.1.3.UBEX-MMU-X200
15.2.Factory Default Settings
15.2.1.UBEX-PRO20-HDMI-F100 / R100 series
15.2.2.UBEX-PRO20-HDMI-F110 / F111
15.2.3.UBEX-PRO20-HDMI-F120 / F121
15.2.4.UBEX-PRO20-HDMI-F130
15.2.5.UBEX-MMU-X200
15.3.Content of Backup File
15.4.Control Port Numbering of the MMU
15.5.Endpoint Port Numbering (Stream ID Calculation)
15.6.Applied Ports (Network Settings)
15.7.Release Notes of the Firmware Packages
15.7.1.Endpoint Series
15.7.2.Matrix Management Unit (MMU)
15.7.3.Known Issues
15.7.4.Endpoint Firmware Packages in the MMU
15.8.Resolutions of the Scaler
15.9.Factory EDID List
15.10.Mechanical Drawings
15.10.1.UBEX F-series Endpoint Devices
15.10.2.UBEX R-series Endpoint Devices
15.10.3.UBEX-MMU-X200
15.11.Maximum Cable Extensions
15.11.1.F-series Endpoints / MMU
15.11.2.R-series Endpoint
15.12.Bandwidth Requirements of the Resolutions
15.12.1.Calculation Formula
15.12.2.Table of the Most Used Resolutions
15.13.Cable Wiring Guide
15.13.1.Serial Ports
15.13.2.Audio Ports
15.14.Quick Link Collection
15.15.Hashtag Keyword List
15.16.Further Document Information
15.17.Limited Warranty Statement
UBEX_Matrix
