1.Introduction
1.1.Description
1.2.Box Contents
1.3.Features of the Device
1.4.Model Comparison
1.5.Typical Application
2.Product Overview
2.1.Front View
2.2.Rear View
2.3.Button Functionality
2.3.1.Video Source Selection
2.3.2.Enable DHCP IP Address
2.3.3.Reset to Factory Default Settings
2.3.4.Control Lock
2.4.Status LEDs
2.4.1.Video LEDs
2.4.2.Ethernet Status LEDs
3.Installation
3.1.Mounting Options
3.1.1.1U High Rack Shelf
3.1.2.Mounting with UD Kit-double
3.1.3.H-Lock
3.2.Electrical Connections
3.2.1.HDMI Input and Output Ports
3.2.2.USB Connectors
3.2.3.RS-232 Connector
3.2.4.Analog Stereo Audio
3.2.5.Secure Control LAN, Utility AV LAN, Configurable Ethernet Port
3.2.6.OCS Connector
3.2.7.GPIO - General Purpose Input/Output Ports
3.3.Powering Options
3.3.1.DC Input Connector
3.4.Connecting Steps
4.Device Concept
4.1.Universal Switcher Concept
4.2.Video Interface
4.2.1.MMX2-4x3-H20
4.2.2.MMX2-4x1-H20
4.3.The Autoselect Feature
4.4.Audio Interface
4.5.Ethernet Interface
4.6.Lightware Advanced Room Automation (LARA)
4.6.1.Opening the LARA interface
4.6.2.Running LARA
4.6.3.Downloading/Uploading a Configuration
4.6.4.Status Board
4.6.5.Touch Panel Support
4.7.Basic Network Security
4.7.1.Disable Ethernet Ports
4.7.2.HTTP/HTTPS
4.7.3.Encryption (HTTPS, WSS)
4.8.802.1x Authentication
4.9.WebSocket Service (WS, WSS)
4.10.Bulk Device Management
4.10.1.Network Settings
4.10.2.Device Configuration
4.11.Serial Interface
4.11.1.Serial Port Diagram
4.12.GPIO Interface
4.13.OCS Interface
4.14.Further Built-in Features
4.14.1.Device Cloning – Configuration Backup and Restore
4.14.2.SNMP Monitoring
4.14.3.Remote System Logging
5.Software Control - Lightware Device Controller
5.1.Using the Built-in Web
5.2.Install and Update
5.3.Running the LDC
5.4.Establishing the Connection
5.5.Bulk Device Management
5.5.1.Network Settings
5.5.2.Device Configuration
5.6.Crosspoints
5.6.1.Port Tiles
5.7.Port Properties Window
5.7.1.HDMI Video Input
5.7.2.HDMI Video Output
5.7.3.Embedded Audio Input
5.7.4.Analog Audio Output
5.7.5.Frame Detector
5.8.CEC Tool
5.9.EDID Management
5.9.1.EDID Operations
5.9.2.EDID Summary Window
5.9.3.Editing an EDID
5.9.4.Creating an EDID - Easy EDID Creator
5.10.Control Menu
5.10.1.Ethernet
5.10.2.GPIO
5.10.3.OCS - Occupancy Sensor
5.10.4.RS-232
5.11.Settings Menu
5.11.1.Status
5.11.2.Network
5.11.3.Service
5.11.4.System
5.12.Advanced View Window
6.Lightware REST API Reference
6.1.Overview
6.2.Instructions for the Terminal Application Usage
6.2.1.Web Browser Plugins
6.2.2.Third-party API Platform
6.2.3.Terminal Application
6.3.Protocol Rules
6.3.1.Command Structure Example
6.3.2.General Rules
6.3.3.Legend for the Control Commands
6.3.4.Lightware REST API vs. LW3 Protocol
6.3.5.Method Types
6.3.6.Supported Commands
6.3.7.Not Supported Commands
6.3.8.Status Codes, Error Messages
6.3.9.Polling
6.4.REST API Security
6.4.1.Authentication
6.4.2.Encryption (HTTPS)
6.5.System Commands
6.5.1.Setting the Device Label
6.5.2.Resetting the Device
6.5.3.Restoring the Factory Default Settings
6.5.4.Querying the Firmware Package Version
6.5.5.Control Lock
6.5.6.Setting the Current Time
6.5.7.Identifying the Device
6.5.8.Toggling the Dark Mode Setting
6.5.9.Setting the Delay of the Dark Mode
6.5.10.Enabling Remote System Logging
6.5.11.Setting the Remote Server Address
6.5.12.Setting the Protocol for the Remote System Logging
6.5.13.Setting the Format of the Remote System Logging
6.5.14.Setting the Port for Remote System Logging
6.5.15.Enabling/Disabling SNMP Monitoring
6.5.16.Setting the Device Location
6.5.17.Setting the SNMP Authentication
6.6.Video Port Settings - General
6.6.1.Switching Video Input
6.6.2.Switching an Input to All Outputs
6.6.3.Locking the Video Port
6.6.4.Muting the Video Port
6.6.5.Setting the Autoselect Policy
6.6.6.Changing the Autoselect-Included Input Ports
6.6.7.Changing the Input Port Priority
6.6.8.Querying the Connected Source
6.6.9.Querying the Connected Destinations
6.6.10.Querying the Input Switching Capability
6.6.11.Querying the Video Signal Presence
6.6.12.HDCP Setting (Input Port)
6.6.13.HdcpMode
6.6.14.Querying Embedded Audio Presence
6.6.15.Muting Embedded Audio
6.6.16.Setting Output Signal Type
6.6.17.Turning on Output 5V
6.7.CEC Command Sending
6.7.1.Simple CEC Code Sending
6.7.2.Remote Control Code Sending
6.8.Audio Port Settings
6.8.1.Switching Audio Input
6.8.2.Querying the Connected Source
6.8.3.Querying the Connected Destinations
6.8.4.Setting Autoselect Operation Mode
6.8.5.Setting the Followed Video Port to Autoselect
6.8.6.Locking the Audio Port
6.8.7.Muting the Audio Port 1
6.8.8.Muting the Audio Port 2
6.8.9.Querying the Audio Signal Presence
6.8.10.Analog Audio Output Volume (dB) Setting
6.8.11.Analog Audio Output Volume Percent Setting
6.8.12.Setting the Balance
6.8.13.Analog Audio Output Level Setting by Steps (dB)
6.8.14.Analog Audio Output Level Setting by Steps in Percent
6.8.15.Analog Audio Output Balance Setting by Steps
6.9.EDID Management
6.9.1.Querying the Emulated EDIDs
6.9.2.Querying the Validity of a Dynamic EDID
6.9.3.Query the Preferred Resolution of a User EDID
6.9.4.Emulating an EDID to an Input Port
6.9.5.Emulating an EDID to All Input Ports
6.9.6.Copying an EDID to User Memory
6.9.7.Deleting an EDID from User Memory
6.9.8.Resetting the Emulated EDIDs
6.10.Ethernet Port Configuration
6.10.1.Setting the DHCP State
6.10.2.Changing the IP Address (Static)
6.10.3.Changing the Subnet Mask (Static)
6.10.4.Changing the Gateway Address (Static)
6.10.5.Applying Network Settings
6.10.6.Setting the Hostname
6.11.Network Security
6.11.1.Enabling/Disabling Ethernet Port
6.11.2.Querying Network Service Port Number
6.11.3.Enabling/Disabling Network Service Port
6.11.4.Querying the Username for Authentication
6.11.5.Setting Password for Authentication
6.11.6.Enabling Authentication
6.12.Serial Port Configuration
6.12.1.BAUD Rate Setting
6.12.2.Stop Bits Setting
6.12.3.Querying Data Bits
6.12.4.Parity Setting
6.12.5.Querying the Serial over IP Port Number
6.12.6.Enabling the Serial over IP Port
6.13.Serial Port Messaging
6.13.1.Sending a Message via RS-232
6.14.GPIO Port Configuration
6.14.1.Setting the Direction of a GPIO Pin
6.14.2.Setting the Output Level of a GPIO Pin
6.14.3.Setting the Output Level for a Specified Time
6.14.4.Toggling the Level of a GPIO Pin
6.15.OCS Port Configuration
6.15.1.Querying the Input Level of an OCS Pin
6.15.2.Setting the Sensor Type
6.15.3.Querying the Reported OCS State
6.16.Updating the Device via REST API
6.16.1.Querying the Update REST API Version
6.16.2.The Updating Process
6.16.3.Uploading the Package
6.16.4.Configuration Parameters – Keep the Current Settings
6.16.5.Configuration Parameters - Setting "Soft" Factory Reset
6.16.6.Configuration Parameters - Querying the Factory Reset Setting
6.16.7.Configuration Parameters - Deleting "Soft" Factory Reset Configuration
6.16.8.Executing the Update
6.16.9.Querying the State of the Updating Process
7.LW3 Programmers’ Reference
7.1.Overview
7.2.Instructions for the Terminal Application Usage
7.3.Websocket (WS) or Secured Websocket (WSS) Usage
7.4.Protocol Rules
7.4.1.LW3 Tree Structure and Command Structure (examples)
7.4.2.General Rules
7.4.3.Legend for the Control Commands
7.4.4.Command Types
7.4.5.Prefix Summary
7.4.6.Error Messages
7.4.7.Escaping
7.4.8.Signature
7.4.9.Subscription
7.4.10.Notifications about the Changes of the Properties
7.5.System Commands
7.5.1.Setting the Device Label
7.5.2.Resetting the Device
7.5.3.Restoring the Factory Default Settings
7.5.4.Querying the Firmware Package Version
7.5.5.Control Lock
7.5.6.Setting the Current Time
7.5.7.Identifying the Device
7.5.8.Toggling the Dark Mode Setting
7.5.9.Setting the Delay of the Dark Mode Setting
7.5.10.Enabling Remote System Logging
7.5.11.Setting the Remote Server Address
7.5.12.Setting the Protocol for the Remote System Logging
7.5.13.Setting the Format of the Remote System Logging
7.5.14.Setting the Port for Remote System Logging
7.5.15.Enabling/Disabling SNMP Monitoring
7.5.16.Setting the Device Location
7.6.Video Port Settings - General
7.6.1.Switching Video Input
7.6.2.Switching an Input to All Outputs
7.6.3.Locking the Video Port
7.6.4.Muting the Video Port
7.6.5.Setting the Autoselect Policy
7.6.6.Changing the Autoselect Included Input Ports
7.6.7.Changing the Input Port Priority
7.6.8.Querying the Connected Source
7.6.9.Querying the Input Switching Capability
7.6.10.Querying the Connected Destinations
7.6.11.Querying the Video Signal Presence
7.6.12.HDCP Setting (Input Port)
7.6.13.HdcpMode
7.6.14.OutputSignalType
7.6.15.EmbeddedAudioPresent
7.6.16.EmbeddedAudioMute
7.6.17.Output5VMode
7.6.18.HDCP Capability (Output Port)
7.6.19.HDCP Setting (Output Port)
7.7.CEC Command Sending
7.7.1.Simple CEC Code Sending
7.7.2.Remote Control Code Sending
7.8.Audio Port Settings
7.8.1.Switching Audio Input
7.8.2.Querying the Connected Source
7.8.3.Querying the Connected Destinations
7.8.4.Setting Autoselect Operation Mode
7.8.5.Setting the Followed Video Port to Autoselect
7.8.6.Locking the Audio Port
7.8.7.Muting the Audio Port 1.
7.8.8.Muting the Audio Port 2.
7.8.9.Querying the Audio Signal Presence
7.8.10.Analog Audio Output Volume (dB) Setting
7.8.11.Analog Audio Output Volume Percent Setting
7.8.12.Setting the Balance
7.8.13.Analog Audio Output Level Setting by Steps (dB)
7.8.14.Analog Audio Output Level Setting by Steps in Percent
7.8.15.Analog Audio Output Balance Setting by Steps
7.9.EDID Management
7.9.1.Querying the Emulated EDIDs
7.9.2.Querying the Validity of a Dynamic EDID
7.9.3.Querying the Preferred Resolution of a User EDID
7.9.4.Emulating an EDID to an Input Port
7.9.5.Emulating an EDID to All Input Ports
7.9.6.Copying an EDID to User Memory
7.9.7.Deleting an EDID from User Memory
7.9.8.Resetting the Emulated EDIDs
7.10.Ethernet Port Configuration
7.10.1.Setting the DHCP State
7.10.2.Changing the IP Address (Static)
7.10.3.Changing the Subnet Mask (Static)
7.10.4.Changing the Gateway Address (Static)
7.10.5.Applying Network Settings
7.10.6.Setting the Hostname
7.11.Network Security
7.11.1.Enabling/Disabling Ethernet Port
7.11.2.Querying the Service Port Number
7.11.3.Enabling/Disabling Service Port
7.11.4.Querying the Username for Authentication
7.11.5.Setting a Password for Authentication
7.11.6.Enabling Authentication
7.11.7.Restarting Network Services
7.12.Serial Port Configuration
7.12.1.BAUD Rate Setting
7.12.2.Stop Bits Setting
7.12.3.Querying Data Bits
7.12.4.Parity Setting
7.13.Sending a Message via RS-232
7.14.GPIO Port Configuration
7.14.1.Querying the Direction of a GPIO Pin
7.14.2.Setting the Direction of a GPIO Pin
7.14.3.Querying the Output Level of a GPIO Pin
7.14.4.Setting the Output Level of a GPIO Pin
7.14.5.Setting the Output Level for a Specified Time
7.14.6.Toggling the Level of a GPIO Pin
7.15.OCS Port Configuration
7.15.1.Querying the Input Level of an OCS Pin
7.15.2.Setting the Sensor Type
7.15.3.Querying the Reported OCS State
8.Firmware Update
8.1.Introduction
8.2.Preparation
8.2.1.About the Firmware Package (LFP2 File)
8.2.2.LDU2 Installation
8.3.Running the Software
8.4.Updating Via GUI
8.5.Command Line Interface (CLI)
8.5.1.How to Run
8.5.2.How to Use
8.6.CLI Commands
8.6.1.Help
8.6.2.LDU2 Version
8.6.3.Check For New LDU2 Version
8.6.4.Device Info
8.6.5.Update
8.6.6.Package Options
8.6.7.Complex Example
8.6.8.Exit Codes
8.7.Updating via REST API
8.8.If the Update is not successful
9.Troubleshooting
9.1.Use Cases
9.2.How to Speed Up the Troubleshooting Process?
10.Technologies
10.1.EDID Management
10.1.1.Understanding the EDID
10.1.2.Advanced EDID Management
10.2.HDCP Management
10.2.1.Protected and Unprotected Content
10.2.2.Disable Unnecessary Encryption
10.2.3.HDCP 2.2
10.3.Pixel Accurate Reclocking
11.Appendix
11.1.Specifications
11.2.Port Numbering
11.3.Applied Ports (Network Settings)
11.4.Factory EDID List
11.5.Cable Wiring Guide
11.5.1.Serial Ports
11.5.2.Audio Ports
11.5.3.OCS Sensor
11.6.Mechanical Drawings
11.7.Content of the Backup File
11.8.Factory Default Settings
11.9.Firmware Release Notes
11.10.Hashtag Keyword List
11.11.Further Document Information
11.12.Limited Warranty Statement
MMX2_UCX_series
