1.Introduction
1.1.Description
1.2.Compatible Devices
1.3.Box Contents
1.3.1.Supplied Accessories
1.3.2.Optional Accessories
1.4.Model Comparison of the Transmitters
1.5.Features
1.6.Typical Application
2.Product Overview
2.1.Front View - Transmitter
2.2.Rear View - Transmitter
2.3.Front and Rear View - Receiver
3.Front Panel Control
3.1.Front Panel LEDs - Transmitter
3.1.1.Video Input LEDs
3.1.2.Audio Input LEDs
3.1.3.HDCP LED
3.1.4.USB LED
3.1.5.Autoselect LED
3.2.Front Panel Buttons - Transmitter
3.2.1.Video Select Button
3.2.2.Audio Select Button
3.2.3.Programmable Show Me Button
3.3.Special Button Functions - Transmitter
3.3.1.Enable DHCP (Dynamic) IP Address
3.3.2.Reset to Factory Default Settings
3.3.3.Control Lock
3.3.4.Restarting of the Device
3.3.5.Entering Firmware Update Mode
3.4.Rear Panel Status LEDs - Transmitter
3.4.1.LIVE LED
3.4.2.LASER ACTIVE LED
3.4.3.FIBER LINK LED
3.4.4.RS-232 LED
3.5.Front Panel LEDs - Receiver
3.5.1.POWER LED
3.5.2.Status LEDs
3.6.Special Button Functions - Receiver
3.6.1.Reset to Factory Default Settings
3.6.2.Entering Firmware Update Mode
4.Installation
4.1.Mounting Options
4.1.1.Rack Shelf Mounting
4.1.2.Under-Desk Mounting
4.2.Connecting Steps
4.2.1.Receiver
4.2.2.Transmitter
4.3.Electrical Connections
4.3.1.5V DC Connection
4.3.2.HDMI Connector
4.3.3.DisplayPort Connector
4.3.4.SC Fiber Optical Connector
4.3.5.DVI-I Connector
4.3.6.Analog Stereo Audio Connector (3.5 mm Jack)
4.3.7.Analog Stereo Audio Connector (5-pole Phoenix)
4.3.8.RS-232 Connector (3-pole Phoenix)
4.3.9.RS-232 Connector (D-sub)
4.3.10.Ethernet Connector
4.3.11.USB Mini Connector
4.3.12.USB Connector for KVM
4.3.13.GPIO - General Purpose Input/Output Ports
5.Device Concept
5.1.Accepted Signals
5.1.1.Transmitter
5.1.2.Receiver
5.2.Port Diagrams
5.3.Audio Interface
5.3.1.Audio Inputs and Modes - Transmitter
5.3.2.Audio Outputs and Modes - Receiver
5.3.3.Audio Options - Example
5.4.Video Interface
5.5.The Autoselect Feature
5.6.USB KVM Function
5.7.Controlling Features
5.7.1.Serial Interface
5.7.2.GPIO Interface
5.7.3.USB Control Interface
5.7.4.Ethernet Control Interface
5.8.Further Built-in Features
5.8.1.Automatically Launched Actions - The Event Manager
5.8.2.Advanced EDID Management
5.8.3.Extender Cloning – Configuration Backup and Restore
5.9.Software Control Modes
6.Software Control - Lightware Device Controller
6.1.Install and Update
6.2.Running the LDC
6.3.Establishing the Connection
6.4.Crosspoint / Port Control Menu
6.5.Port Properties Windows
6.5.1.Video Inputs
6.5.2.Digital Audio Inputs
6.5.3.Analog Audio Inputs
6.5.4.Video Outputs
6.5.5.Digital Audio Outputs
6.5.6.Analog Audio Output
6.6.Diagnostic Tools
6.6.1.Frame Detector
6.6.2.No Sync Screen (Test Pattern)
6.7.USB KVM
6.7.1.USB KVM in the Receiver
6.7.2.USB KVM in the Transmitter
6.8.EDID Menu
6.8.1.EDID Operations
6.8.2.EDID Summary Window
6.8.3.Editing an EDID
6.8.4.Creating an EDID - Easy EDID Creator
6.9.Control / Device Control Menu
6.9.1.RS-232
6.9.2.GPIO
6.9.3.Ethernet
6.10.Event Manager
6.10.1.Create or Modify an Event
6.10.2.Special Tools and Accessories
6.10.3.Clear One or More Event(s)
6.10.4.Export and Import Events
6.10.5.Event Creating - Example
6.11.Settings Menu
6.11.1.Status
6.11.2.Network
6.11.3.Backup
6.11.4.System
6.12.Configuration Cloning (Backup Tab)
6.12.1.Steps in a Nutshell
6.12.2.Save the Settings of a Device (Backup)
6.12.3.Upload the Settings to a Device (Restore)
6.13.Advanced View Window
7.LW2 Programmer's Reference
7.1.Protocol Description
7.2.Instructions for the Terminal Application Usage
7.3.General LW2 Commands
7.3.1.List of All Available LW2 Commands
7.3.2.Viewing Product Type
7.3.3.Querying the Device Label
7.3.4.Querying Control Protocol
7.3.5.Viewing Firmware Version of the CPU
7.3.6.Compile Time
7.3.7.Viewing Serial Number
7.3.8.Viewing Installed Board
7.3.9.Viewing Firmware for All Controllers
7.3.10.Querying Health Status
7.3.11.Restarting the Device
7.3.12.Restoring Factory Default Settings
7.4.AV Port Settings
7.4.1.Switching an Input to the Outputs
7.4.2.Muting an Output
7.4.3.Unmuting an Output
7.4.4.Locking an Output
7.4.5.Unlocking an Output
7.4.6.Viewing Connection State on the Output
7.4.7.Viewing the Crosspoint Size
7.4.8.Changing the Video Autoselect Mode
7.4.9.Changing the Audio Autoselect Mode
7.4.10.Changing the Video Input Priorities
7.4.11.Changing the Audio Input Priorities
7.5.Network Configuration
7.5.1.Querying the Current IP Status
7.5.2.Setting the IP Address
7.5.3.Setting the Subnet Mask
7.5.4.Setting the Gateway Address
7.5.5.Applying Network Settings
7.5.6.Enabling/Disabling the Ethernet Port
7.6.GPIO Port Configuration
7.6.1.Setting the Level and Direction for Each Pins
7.7.LW2 Commands – Quick Summary
8.LW3 Programmer's Reference
8.1.Overview
8.2.Instructions for the Terminal Application Usage
8.3.Protocol Rules
8.3.1.LW3 Tree Structure and Command Structure (examples)
8.3.2.General Rules
8.3.3.Legend for the Control Commands
8.3.4.Command Types
8.3.5.Prefix Summary
8.3.6.Error Messages
8.3.7.Escaping
8.3.8.Signature
8.3.9.Subscription
8.3.10.Notifications about the Changes of the Properties
8.4.System Commands
8.4.1.Querying the Product Name
8.4.2.Setting the Device Label
8.4.3.Querying the Serial Number
8.4.4.Querying the Firmware Version
8.4.5.Restarting the Device
8.4.6.Recalling the Factory Default Settings
8.4.7.Locking the Front Panel Buttons
8.5.Video Port Settings
8.5.1.Querying the Status of Source Ports
8.5.2.Querying the Status of Destination Port
8.5.3.Querying the Video Crosspoint Setting
8.5.4.Switching a Video Input
8.5.5.Disconnecting the Video Inputs
8.5.6.Querying the Video Autoselect Settings
8.5.7.Changing the Autoselect Mode
8.5.8.Querying the Input Port Priority
8.5.9.Changing the Input Port Priority
8.5.10.Muting Video Input
8.5.11.Unmuting Video Input
8.5.12.Locking Video Input
8.5.13.Unlocking Video Input
8.5.14.Muting Video Output
8.5.15.Unmuting Video Output
8.5.16.Locking Video Output
8.5.17.Unlocking Video Output
8.5.18.Setting theHDCP (Input Port)
8.5.19.Setting the HDCP (Output Port)
8.5.20.Test Pattern Generator Mode
8.5.21.Test Pattern Generator Clock Source
8.5.22.Test Pattern Setting
8.5.23.Signal Type Settings (Output Port)
8.6.Audio Port Settings
8.6.1.Querying the Status of Source Ports
8.6.2.Querying the Status of Destination Port
8.6.3.Querying the Audio Crosspoint Setting
8.6.4.Switching Audio Input
8.6.5.Querying the Audio Autoselect Settings
8.6.6.Changing the Autoselect Mode
8.6.7.Querying the Input Port Priority
8.6.8.Changing the Input Port Priority
8.6.9.Muting Audio Input
8.6.10.Unmuting Audio Input
8.6.11.Locking Audio Input
8.6.12.Unlocking Audio Input
8.6.13.Muting Audio Output
8.6.14.Unmuting Audio Output
8.6.15.Locking Audio Output
8.6.16.Unlocking Audio Output
8.7.Analog Audio Port Settings
8.7.1.Setting the Volume in dB
8.7.2.Setting the Volume in Percent
8.7.3.Setting the Balance
8.7.4.Setting theGain
8.8.Event Manager Basics
8.8.1.How to arrange an Event?
8.8.2.Setting a Condition by Linking Another Condition
8.8.3.Setting a Condition by Linking More Conditions
8.8.4.Setting an Action by Specifying a Direct Path
8.8.5.Setting an Action by Linking Another Action
8.9.Event Manager Tool Kit
8.9.1.Setting the Delay
8.9.2.Setting the Name of the Event
8.9.3.Enabling/Disabling the Event
8.9.4.Triggering a Condition
8.9.5.Querying the Condition Counter
8.9.6.Querying the Condition Trigger Counter
8.9.7.Testing an Action
8.10.Ethernet Port Configuration
8.10.1.Setting the DHCP State
8.10.2.Changing the IP Address (Static)
8.10.3.Changing the Subnet Mask (Static)
8.10.4.Changing the Gateway Address (Static)
8.10.5.Applying Network Settings
8.11.RS-232 Port Configuration
8.11.1.Setting theProtocol
8.11.2.Setting theBAUD Rate
8.11.3.Setting the Databits
8.11.4.Setting the Stopbits
8.11.5.Setting theParity
8.11.6.Setting the RS-232 Operation Mode
8.11.7.Enabling/Disabling Command Injection
8.12.Ethernet Message Sending
8.12.1.Sending a TCP Message (ASCII-format)
8.12.2.Sending a TCP Text (ASCII-format)
8.12.3.Sending a TCP Binary Message (HEX-format)
8.12.4.Sending a UDP Message (ASCII-format)
8.12.5.Sending a UDP Text (ASCII-format)
8.12.6.Sending a UDP Binary Message (HEX-format)
8.13.RS-232 Message Sending
8.13.1.Sending a Message (ASCII-format) via RS-232
8.13.2.Sending a Text (ASCII-format) via RS-232
8.13.3.Sending a Binary Message (HEX-format) via RS-232
8.13.4.Using Hexadecimal Codes
8.14.GPIO Port Configuration
8.14.1.Setting the Direction of a GPIO Pin
8.14.2.Setting the Output Level of a GPIO Pin
8.14.3.Toggling the Level of a GPIO Pin
8.15.EDID Management
8.15.1.Querying the Emulated EDIDs
8.15.2.Querying the Validity of a Dynamic EDID
8.15.3.Querying the Preferred Resolution of an User EDID
8.15.4.Emulating an EDID to an Input Port
8.15.5.Emulating an EDID to All Input Ports
8.15.6.Copying an EDID to User Memory
8.15.7.Deleting an EDID from User Memory
8.15.8.Resetting the Emulated EDIDs
9.Firmware Update
9.1.About the Firmware Package (LFP file)
9.2.Short Instructions
9.3.Install and Update
9.4.Detailed Instructions
9.4.1.Establish the Connection
9.4.2.Prepare the Firmware Update in LDC
9.4.3.Start the LDU and Follow the Instructions
9.5.Keeping the Configuration Settings
10.Troubleshooting
10.1.Use Case Studies
10.2.How to Speed Up the Troubleshooting Process
11.Technologies
11.1.EDID Management
11.1.1.Understanding the EDID
11.1.2.Advanced EDID Management
11.2.HDCP Management
11.2.1.Protected and Unprotected Content
11.2.2.Disable Unnecessary Encryption
11.3.Pixel Accurate Reclocking
12.Appendix
12.1.Specification
12.1.1.HDMI-3D-OPT-TX200 series Transmitters
12.1.2.HDMI-3D-OPT-RX150RA Receiver
12.2.Input/Output Port Numbering
12.3.Factory Default Settings
12.3.1.Transmitter
12.3.2.Receiver
12.4.Content of Backup File
UM.html#_idTextAnchor352
12.5.Maximum Fiber Cable Extensions
12.6.Mechanical Drawings
12.6.1.Transmitter
12.6.2.Receiver
12.7.Cable Wiring Guide
12.7.1.Serial Ports
12.7.2.Audio Ports
12.8.Factory EDID List
12.9.Applied Network Ports (Network Settings)
12.10.Release Notes of the Firmware Packages
12.10.1.Transmitters
12.10.2.Receiver
12.11.Hashtag Keyword List
12.12.Further Document Information
12.13.Limited Warranty Statement
HDMI-3D-OPT_Series
