Release notes for UBEX MMU

v2.3.0b12
Release date: 2028-08-06
New feature:
  • The new firmware supports the new F130 hardware and USB 2.0 extension.
  • Endpoints firmware updated (v3.4.0b7).
  • Known limitations:
  • Missing embedded web support for multiview mode and multistream in transmitter mode.
  • USB 2.0 connection requires LARA or an external controller; USB 2.0 switching is not yet supported by the LW3 API.
  • v2.2.0b5
    Release date: 2023-11-24
    New feature:
  • A new operating mode (multiview) has been added to the endpoint firmware without MMU and LDC support for now. Currently it can be only configured by LW3 commands according to the user manual.
  • Added new scaling options ("Tile resolution") in TX and TRX mode for proper multiview operation.
  • Multistream is supported in transmitter mode. It could transmit 4 streams instead of 2 streams. Both HDMI input can be transmitted as scaled and native mode in same time.
  • Endpoints firmware updated (v3.3.1b1). Transmitter mode supports two additional native stream (S3, S4). Transceiver mode can't send native stream and can't support multiview output. A new operating mode was introduced (Multiviewer), which can combine a maximum of 4 streams at the output.
  • Bugfix:
  • Fixed the numbers of supported streams in Multiviewer mode
  • v2.1.2b2
    Release date: 2023-10-31
    New feature:
  • Changed the endpoint package (v3.1.3)
  • Bugfix:
  • Fixed the Link led issue
  • v2.1.1b2
    Release date: 2023-10-19
    New feature:
  • Changed the endpoint package (v3.1.2)
  • Bugfix:
  • Fixed an audio issue with some sources, improved the robustness of the product
  • v2.1.0b5
    Release date: 2023-07-26
    New feature:
  • Forced output color depth option is added for the perfect seamless switching. UBEX supports limiting the color depth also on the link to reduce the bandwidth.
  • The UBEX endpoint supports deep color and HDR contents (e.g. Dolby Vision). The new version (v3.1.1) isn't compatible with previous versions (v2.x.y).
  • Changed the endpoint package (v3.1.1), update embedded web.
  • v2.0.1b3
    Release date: 2023-07-26
    New feature:
  • The minimum speed of the fans has been set to 2500 RPM.
  • Firmware update is improved and flash memory is extended. The functionality is the same as v2.4.1. It is a compatibility package because of the downgrading from v3.x.y to v2.x.y is not possible.
  • Changed the endpoint package (v3.0.2).
  • v2.0.0b3
    Release date: 2023-04-24
    New feature:
  • The UBEX endpoint supports deep color and HDR contents (e.g. Dolby Vision). The new version (v3.0.0) isn't compatible with previous versions (v2.x.y).
  • The new MMU firmware contains the new UBEX endpoint firmware (v3.0.0), a new embedded web and a fix of a maintenance issue.
  • v1.7.1b5
    Release date: 2022-09-15
    New feature:
  • Incompatibility issue with newer version of AVI info frame is fixed. AVI info frame version 4 is converted to version 2.
  • We fixed some known issue in the firmware of the portprocessor, like random black screen on the output after rebooting.
  • Added the scaler function for the second video pipe in transmitter mode.
  • Added new version of endpoint firmware (v2.4.1) and embedded web (v2.6.0).
  • Bugfix:
  • We fixed the random initialization issue of video pipe at some resolutions (e.g. 2912x2184p60).
  • v1.7.0b8
    Release date: 2022-07-01
    New feature:
  • Fixed the RJ45 converter module test issue of the EOLT (production).
  • Endpoint limitation has been introduced in the MMU produced with a new part number in order to provide smaller and cheaper systems to customers; a new license allows upgrading the endpoint limitation even in the field.
  • Bugfix:
  • Fixed the regression error of the optical connection of the MMU (1G SFP interface).
  • Fixed the regression error of the RS-232 interface of the MMU.
  • v1.6.2b2
    Release date: 2022-05-03
    Bugfix:
  • Some resolutions (e.g. 2080x2184p60) didn't work properly, so we improved our bandwidth calculation algorithm and fixed this issue.
  • v1.6.1b1
    Release date: 2022-02-11
    Bugfix:
  • Fixed an End-of-Line Test (EOLT) reboot issue.
  • v1.6.0b10
    Release date: 2022-02-09
    New feature:
  • USB KM (HID devices such as keyboard, mouse) extension added to the firmware. Only the F120 hardware version and currently only the emulated transmission mode are supported.
  • USB KM (HID devices such as keyboard, mouse) layer added to the firmware. Only the F120 hardware version and currently only the emulated transmission mode are supported. Seamless switching is supported. Only point to point connections are possible.
  • Support for the "SFP+ to RJ45" converter module has been added to the firmware. In this case, the minimum fan speed is 2500 rpm.
  • v1.5.0b2
    Release date: 2021-09-02
    New feature:
  • The scaling module was also added to the second video pipe in receiver mode. Both outputs of UBEX receivers are scalable.
  • The scaling module was also added to the input video pipe in transceiver mode. Both input and output of UBEX transceivers are scalable.
  • Updated the video wall setup in the GUI, both RX output can be usable in the video wall.
  • Added new version of endpoint firmware (v2.1.0) and embedded web (v2.3.0).
  • Changed the frame rate converter section of the scaler in TRX mode on the GUI.
  • Changed the frame rate converter section of the scaler in RX mode on the GUI.
  • Bugfix:
  • Bugfix for Edit Videowall button.
  • Crosspoint state recovery process failure bugfix.
  • v1.4.0b2
    Release date: 2021-06-18
    New feature:
  • Added new version of endpoint firmware (v2.0.0).
  • v1.3.4b1
    Release date: 2020-12-17
    New feature:
  • Added new version of endpoint firmware (v1.5.5).
  • v1.3.3b2
    Release date: 2020-11-03
    New feature:
  • UBEX System Configurator updated to the latest version, v1.0.1b1.
  • Added new version of endpoint firmware (v1.5.2).
  • Added new version of embedded web (v2.1.0).
  • Added new version of endpoint firmware (v1.5.4b1).
  • Bugfix:
  • Async Command resender queue implemented to ensure the failed commands resend.
  • We have updated the factory EDID list.
  • v1.3.2b1
    Release date: 2020-09-01
    New feature:
  • Added new version of endpoint firmware (v1.5.2).
  • v1.3.1b1
    Release date: 2020-06-03
    New feature:
  • Added new version of embedded web (v2.0.1) and endpoint firmware (v1.5.1).
  • v1.3.0b6
    Release date: 2020-05-13
    New feature:
  • Added System monitoring function with new LW3 nodes and properties.
  • Support video freeze function.
  • Support the dark mode function in the endpoints.
  • Support the HDCP 2.2 Type 1 forcing function in the endpoints.
  • The LLDP information of endpoints added to log.
  • Copy function (RX, TRX) and local inputs in RX added.
  • Added new Endpoint firmware (v1.5.0) and new embedded web (v2.0.0)
  • v1.2.2b1
    Release date: 2020-01-30
    New feature:
  • Added new version of Endpoint's firmware (v1.4.2b4)
  • The embedded web supports to force HDCP 2.2 Type 1 Content on outputs.
  • v1.2.1b1
    Release date: 2019-12-04
    Bugfix:
  • Added new version of Endpoint's firmware (v1.4.1b2)
  • v1.2.0b9
    Release date: 2019-11-27
    Bugfix:
  • Fixed some issues (backup, settings storing, status messages, MDNS support) and improved the stability.
  • Added the built-in Endpoint firmware version (v1.4.0) for the Centralized Firmware Update.
  • The Centralized Firmware update function is fixed. This feature is working from the installed MMU firmware v1.1.0 and Endpoint firmware v1.3.1 and available for the later firmware package versions.
  • IP settings limitation is fixed. The 10.0.0.0/8 IP range is fully supported in the MMU IP settings.
  • After upgrading the MMU cannot be downgraded to versions prior to v1.2.0.
  • Fixed some UI bugs and performance issues. Fixed Tile view.
  • v1.1.1b8
    Release date: 2019-07-03
    New feature:
  • Added Identify stream function.
  • Added filter and sort feature to the Upgrade Firmwares tab.
  • v1.3.2 endpoint firmware supported by MMU.
  • Bugfix:
  • Update process improved and fixed issues.
  • Fixed minor GUI bugs.
  • v1.1.0b10
    Release date: 2019-07-02
    New feature:
  • Grid Video Wall is implemented.
  • Centralized System Update is available - The Firmware update of the Endpoints are managed by the MMU.
  • Adding support of Rental Endpoints.
  • Command injection to IR endpoint ports is available.
  • Bugfix:
  • Adding missing 4K EDIDs (F146 - F148) to the Factory EDID list.
  • Fixing RemoteIP problem by implementing periodic membership report to multicast groups.
  • Fixing crash caused by TcpTunnel in debug mode.
  • Known issue:
  • In video wall setups, upscaling is not fully supported. (e.g.: 4K video content displayed on a 2-by-2 video wall where the resolution of the displays is 4K).
  • In tile view handling of video walls is limited, it is recommended to use the grid view for video walls.
  • v1.0.7b1
    Release date: 2019-05-20
    Bugfix:
  • Terminal messages are shown on the local serial port of the MMU during boot time.
  • In LDC, on the tile of the endpoint RS-232 ports, the command injection port is not updated after changing it on the property panel.
  • In LDC, on the port property panel, the databits field of the endpoint RS-232 ports is empty, the databit count is always 8 bits.
  • v1.0.6b12
    Release date: 2019-05-10
    New feature:
  • Supports UBEX-PRO20G-HDMI-F110 endpoints (Analog audio input and output, RS-232)
  • NTP client is available
  • Command injection to RS-232 endpoint ports is available
  • Video and Audio cross-point Tile View
  • Supports TRX2 mode for UBEX-PRO20G-HDMI-F100 and UBEX-PRO20G-HDMI-F110 endpoints
  • Supports configuration and tagging of RS-232 and Ethernet endpoint ports
  • Redesigned device properties
  • Bugfix:
  • General improvements on stabiliy
  • Fixing firmware update issues.
  • Known issue:
  • In LDC, on video cross-point tile view, the not available connection of the TRX2 mode (local video loop-back) is not displayed properly.
  • In LDC, on the port property panel, the databits field of the endpoint RS-232 ports is empty, the databit count is always 8 bits.
  • In LDC, on the tile of the endpoint RS-232 ports, the command injection port is not updated after changing it on the property panel.
  • Command injection to IR endpoint ports is not available.
  • v1.0.4b1
    Release date: 2018-11-20
    Bugfix:
  • Fixed configuration loss during backup-restore and firmware upgrade. This issue was only present in package version 1.0.3b1. Please be sure to store a backup of your configuration before upgrading from v1.0.3b1 to v1.0.4b1. Upgrades from other versions are not affected.
  • v1.0.3b1
    Release date: 2018-11-09
    Bugfix:
  • Fixed a bug that caused the MMU not being able to reload the configurations for the endpoints with 918200## part number after the reset of the MMU.
  • v1.0.2b1
    Release date: 2018-09-25
    Bugfix:
  • LCD re-initialisation issue is fixed.
  • v1.0.1b5
    Release date: 2018-09-25
    New feature:
  • The MMU built-in web control software is available.
  • Basic LCD menu is available to set Network settings and reset the Ubex MMU to factory defaults.
  • System log viewer is available in the built-in web control software.
  • Known issue:
  • LW2 simple protocol is not supported, it is recommended to use LW3 protocol to control the MMU.
  • Control USB is not supported, it is recommended to control the MMU through the Control Ethernet Interface.
  • Only one MMU per network is supported.
  • MMU managed Endpoint firmware update is not supported, the Endpoints have to be updated separately by the LDU2 software.
  • Only basic bandwidth management is supported. (HDMI1 channel has high priority, if bandwidth limit is exceeded by HDMI1 and HDMI2 streams, HDMI2 is not transmitted or received.)
  • Video and Audio cross-point mute and lock functions are not available.
  • v1.0.0b6
    Release date: 2018-07-05
    Known issue:
  • The LCD menu is not supported.
  • Only one MMU per network is supported.
  • MMU managed Endpoint firmware update is not supported, the Endpoints have to be updated separately by the LDU2 software.
  • The MMU built-in web control software is in beta state, using LDC is recommended.
  • Control USB is not supported, it is recommended to control the MMU through the Control Ethernet Interface.
  • LW2 simple protocol is not supported, it is recommended to use LW3 protocol to control the MMU.
  • Video and Audio cross-point mute and lock functions are not available.
  • Only basic bandwidth management is supported. (HDMI1 channel has high priority, if bandwidth limit is exceeded by HDMI1 and HDMI2 streams, HDMI2 is not transmitted or received.)