Release notes for Taurus UCX-TX

v1.16.0b6
Release date: 2025-06-05
New feature:
  • Dedicated and Separated BYOD VLAN presets are available on Taurus TPX/TPN devices as well now.
  • Taurus TPX devices are able to update the firmware of the HDMI-TPX/TPN-RX devices now. Using the functionality the Taurus TPX must be set in management network.
  • Taurus TPX/TPN devices used on management VLAN support 802.1x authentication for itself as well as for connected BYOD devices now.
  • Management Network is allowed on the Taurus TPN variants as well now.
  • Support Package Enhancement: The AVX settings of SDVoE devices are now included in the support package, facilitating more efficient debugging and issue analysis.
  • Main_2, Main_3, and Main_4 MAC addresses are now automatically generated for every device. These MAC addresses are utilized when multiple VLANs are configured, simplifying network integration.
    • Bugfix:
  • A key issue has been resolved: DisplayPort Alt Mode now works with laptops exhibiting improper USB-C PD communication, ensuring more reliable BYOD performance.
  • Resolved Issue: A memory leak that was causing long-running devices to freeze has been fixed.
    • Known issue:
  • Existing Intermittent Communication Loss Between Taurus TPX and HDMI TPX-RX Units In some deployments, a loss of communication has been observed between Taurus TPX transmitters and HDMI TPX-RX receivers after prolonged operation. This may result in temporary signal interruptions or device unresponsiveness. The issue is believed to be related to a low-level synchronization anomaly in the link layer between the transmitter and receiver. Workaround: A power cycle of the receiver typically restores operation. We recommend monitoring for updates, as a firmware fix is currently under development and will be included in an upcoming release.
    • v1.15.0b2
    Release date: 2025-03-12
    Bugfix:
  • Critical USB-C Ethernet connectivity issues have been resolved now.
  • Critical AVX issues blocking the TPX-RX communication have been resolved now.
    • v1.14.0b5
    Release date: 2024-12-20
    New feature:
  • Major update on LARA is here: LARA 1.3 integration. Detailed LARA change log is available on the LARA portal.
  • New variant: DCX-3x1-TPX-TX10 is now officially supported.
  • New variant: DCX-3x1-TPN-TX10 is now officially supported.
  • Fixed a critical issue in the management network causing static IP problems (192.168.1.X subnets are working now).
    • v1.13.0b3
    Release date: 2024-11-19
    New feature:
  • General Security Update: Aims to ensure compliance with security standards.
  • Tx-RX Communication Robustness Improvement: HDMI-TPX and HDMI-TPN product families now require a minimum firmware version of 2.5.2.
  • Network Separation: Introduces a network port on TX boxes that filters traffic, making only the main MAC address visible. When network separation is enabled, RX updates through LDU are not possible. Please refer to the user manual for further details. Network separation is not yet supported for UCX-TPN products. Additional setup limitations are also documented in the user manual.
  • OpenSSH Update: Addressed security vulnerabilities by upgrading to OpenSSH v9.8.
    • Bugfix:
  • LARA Redirect Bug: Fixed an issue in the Taurus Webserver where redirects caused confusion in the frontend due to unclear sources
  • Logging Improvements: Fixed an issue preventing logs from being saved to permanent storage by updating the logging configuration to ensure proper functionality.
  • LARA Name Resolution Bug: Resolved an issue where the LARA script encountered name resolution errors, causing unexpected termination.
    • v1.11.1b4
    Release date: 2024-09-24
    New feature:
  • Critical issues during first time programming have been fixed.
    • v1.11.0b3
    Release date: 2024-08-02
    New feature:
  • Fixed a known, critical issue which was impacting the TX-RX USB layers.
    • Known issue:
  • USB-C Ethernet connection instabilities.
    • v1.10.0b2
    Release date: 2024-07-02
    New feature:
  • System setups where: Taurus UCX-2x1-TPX-TX20 OR Taurus UCX-4x3-TPX-TX20 connected with Taurus UCX-3x3-TPX-RX20 are officially supported now (both LEX and REX modes).
  • LARA 1.2.0b41 integration ( Taurus UCX-3x3-TPX-RX20 driver is included now).
    • v1.9.0b9
    Release date: 2024-06-14
    New feature:
  • Power Management change. PoE "auto" mode option has been removed.
  • Two lane DisplayPort alternate mode is now available as well in case the four lane alternate mode setting is not supported.
  • FlowControl handling on serial port is now supported.
  • New experimental LW3 node is available for testing now: EXPERIMENTAL/MEDIA/USB/Service.Enabled.
  • UCX-4x3-TPN-TX20 is now officially supported.
  • Password history is now maintained on web authentication. The past ten passwords are no longer available to used.
  • A critical issue has been fixed at the USB-C Ethernet connection.
  • LARA 1.2.0b40 integration.
  • Critical issues have been fixed at the launch of the LARA configurations.
  • USB access is available via service port for demonstrating and piloting the StreamDeck device support in LARA.
  • Taurus TPX-TX20 and HDMI RX communication channel has been significantly improved. Further upgrades are coming.
  • UCX-2x1-TPN-TX20 is now officially supported.
    • Known issue:
  • USB-C Ethernet connection occasionally disconnects the connecting devices.
    • v1.7.0b6
    Release date: 2024-01-16
    New feature:
  • Disabled USB-C Ethernet ports are also disabling the ethernet bridge now.
  • Complete redesign of the WebLDC's session management. A new logout button has been introduced for logging out from the session. After 120 minutes the session will be closed and the user is going to be logged out automatically. After 15 minutes of inactivity the session will be closed also. 2 minutes prior to the inactivity logout the user has to option to confirm the willingness to keep using the system.
  • LARA 1.2 integration.
  • Time zones are available option now for timed events. A new optional NTP service has been introduced. A new LW API has been introduced for date/time settings. The device does observe now both the UTC and both the local times.
  • RX ethernet ports can be enabled / disabled now from the TPX-TX's WebLDC. A new LW API has been introduced for the ethernet port handling. The transparent VLAN mode will remain as a default.
  • UCX-2x1-TPX-TX20 is supported now.
  • Separated VLAN presents are available now. WebLDC supports now the selection of the different presets.
    • v1.4.0b8
    Release date: 2023-11-09
    New feature:
  • Health Status improvement - AVX and 10G PHY temperatures are now available on the WebLDC.
  • RX Audio DAC volume ( % and dB) is now configurable at WebLDC.
    • v1.3.0b4
    Release date: 2023-09-28
    New feature:
  • Lara 1.1.10 integration
  • UDP and TCP ports between 20.000 and 30.000 are free to use including from LARA scripts. The clear list of the open new ports are included in the LARA disclaimer.
  • AVX firmware version upgrade from 1.5 into 2.0.
  • Please update your TPX firmware version into 2.3.0b15 to avoid any behavior issues.
    • v1.2.0b3
    Release date: 2023-09-07
    New feature:
  • The extended serial port is configurable now.
  • RX Ethernet ports can be disabled/enabled now.
  • Power modes of the RX USB-A ports are adjustable now (Auto/Off).
  • Health statuses (AVX and 10G PHY temperatures) are available now.
  • RX OCS is available and configurable now.
    • Known issue:
  • LDU2 does prompt an error message. Please proceed with the "OK" button, and the firmware update will be completed succesfully.
    • v1.1.0b4
    Release date: 2023-08-15
    New feature:
  • 100W charging settings are available now on the user interface
  • LARA v1.1.9 has been integrated. For more information please read the LARA release notes.
    • Bugfix:
  • The following properties can be set to On or Off mode: /V1/MEDIA/VIDEO/O1.Output5VMode /V1/MEDIA/VIDEO/O2.Output5VMode Auto mode will be available in a future release.
  • Ethernet port P5 is counting TX Ethernet packets even if there is no connection. /MEDIA/ETHERNET/P5/COUNTERS.TxCounter Ethernet packet transmission on P5 is not affected by this issue. This Ethernet port works as expected other than the incorrect TX counter value.
  • If a USB Host without DisplayPort Alterante mode support is connected to one of the USB Type-C connectors, then the ActiveAltMode property erroneously reads as DP. /V1/MEDIA/USB/U1.ActiveAltMode=DP This issue causes Lightware Device Controller to erroneously display a yellow "DP" indicator on the port panel, which means the connection successfully entered DisplayPort Alterante mode. The following property describing the DisplayPort Alterante mode capability of the connected Host works as expected. /V1/MEDIA/USB/U1.HostSupportsDpAltMode=false USB and Displayport Data transmission is not affected.
  • An external control system using LW3 protocol subscribed to an HDMI output node OPEN /V1/MEDIA/VIDEO/O1 might not receive all CHG messages related to the presence of embedded audio on the output. For example if the video crosspoint switches beteen two sources: one with- and one without embedded audio, then the following CHG messages might be missing: CHG /V1/MEDIA/VIDEO/O1.EmbeddedAudioPresent=false CHG /V1/MEDIA/VIDEO/O1.EmbeddedAudioPresent=true Transmission of the embedded audio stream from input to output is unaffected. Muting the audio also works as expected.
    • v1.0.0b5
    Release date: 2023-07-27
    New feature:
  • First Release of Taurus TX with: - Video extension, - USB2.0 extension, - LARA v1.1.8 has been integrated into Taurus-UCX-TX v1.0.0. For more information please read LARA release notes. - TX Serial port 3 to RX has fixed Baudrate of 115200 Limitations, will be implemented in upcoming firmware releases: - No OCS - No connection information from RX to TX - Fully transparent 1G Ethernet ports, no separation - 100W charging is going to be only available on LW3 for as of now